Inauguration of the CFH headquarters and Europe's largest fan test stand in Marl
On Friday, 16 June 2023, the time had come at Neckarstraße 23 in Marl - around 130 invited guests were eagerly waiting for the official inauguration ceremony of the new site and the launch of the new fan test stand to begin.
"The test stand at our new location is the largest chamber test stand in Europe," says Jens Kegenhoff, Technical Manager of CFT GmbH. "With it, we can test fans up to an impeller diameter of 4.50 m and a drive power of more than three megawatts in compliance with the standards."
The guests are also visibly impressed - the 7 m high and 13 m deep concrete test chamber, which is also embedded 1 m deep in the floor, towers up into the production hall like a cathedral.
In addition to introductory words by the managing partner of CFH, Dr. Reinhold Both, and technical speeches, the programme also included the official blessing of the test stand by Pastor Georg Rücker, stadium pastor of FC Schalke 04.
This was followed by the most exciting part of the programme - the launch of the test stand, the technical measurement results of which were displayed to the guests on a large monitor. But the air movement and acoustics in the hall also spoke for themselves, because depending on the type of fan being tested, large air velocities of up to over 2.5 million m³ of air per hour are generated here.
Finally, the test chamber with its flow rectifier and state-of-the-art measurement technology could be visited.
"From the afternoon onwards, all employees of our German locations and their companions are also invited to the inauguration ceremony," Dr Both announced. "Still at the old location in Gladbeck, I said that I was particularly looking forward to the first celebration in the new building."
Permit for phosphorus recycling plant in Bottrop granted by the district government of Münster
In the framework of the BMBF-funded RePhoR joint project AMPHORE, the construction and operation of the demonstration plant at the Bottrop wastewater treatment plant (EGLV) was approved by the responsible authority under immission control law.
The owner and operator of the plant is PhosRec Phosphor-Recycling GmbH, Bottrop, a company of the water associations Emschergenossenschaft, Lippeverband, Ruhrverband, Wupperverband and Linksniederrheinische Entwässerungs-Genossenschaft.
AMPHORE Project for Phosphorus Recycling in NRW progresses
The research project "Regional sewage sludge and ash management for phosphorus recycling for a metropolitan area" (AMPHORE), with which PARFORCE-Technology Cooperation GmbH (PTC) was commissioned, has entered the implementation phase after a successful first project phase.
New CFH Headquarters in Marl - the Countdown is on!
This summer, CFH Holding, together with its subsidiaries CFT and PTC, will move to its new headquarters in Marl! The new location, with more than 7,500 m² of production space - including an innovative fan test stand - will be heated and cooled by a geothermal system and supplied with electricity from its own photovoltaic system.
Last Friday, our employees were able to get an impression of the current construction progress at an "open site day". In the future, you can reach us at the following address:
We are pleased to announce that CFH Group has taken over the sales divisions Road Tunnel Ventilation and Metro & Rail Ventilation from DLK Ventilatoren GmbH in Schöntal, Germany, with effect from 1st November 2021.
The sales activities as well as the entire order processing of jet fans and smoke extraction fans for tunnels and metros will be carried out exclusively by CFT GmbH immediately.
The acquired fan technology is based on more than 50 years of competence in the construction of industrial and smoke extraction fans from the brand manufacturer DLK Ventilatoren GmbH.
The acquisition concerns the SATM and SARM product ranges for fire protection classes F300 and F400. The tunnel jet fans (SATM series) are available in sizes from 630 to 1,600 mm and the reversible smoke extract fans (SARM series) in sizes from 1,000 to 2,500 mm.
We look forward to collaborating on projects - worldwide!
New CFH subsidiary for recovering phosphorus from sewage sludge and ash
CFH Group and PARFORCE Engineering & Consulting GmbH are pleased to announce the launch of a joint subsidiary, PTC - PARFORCE-Technology Cooperation GmbH.
Together we engineer, build and operate industrial plants for the recovery of phosphorus from effluents containing phosphate such as sewage sludge ash according to the German Sewage Sludge Act (AbfKlärV).
By the end of 2023, operators of wastewater treatment plants must submit their concept to the authorities for implementing their phosphorus recovery obligation, which will apply from 01.01.2029.
In the EU, phosphorus is considered to be a critical raw material. The production of phosphoric acid from waste streams helps to preserve natural resources and support a recycling economy.
We are looking forward to upcoming joint projects to implement circular recovery!
CFT Dry Dedusting for Roadheaders - Fully Refurbished “Down Under”
Under the current circumstances, the CFH subsidiaries around the world are especially important to us.
In this respect, we are very proud of the work done out by our subsidiary, CFH Australia. Not only were they able to repair a considerable number of used CFT dry dedusters locally in Australia, but they also upgraded them with additional functions before being putting them back into operation successfully on new jobs.
The optimized systems offer our customers important advantages during operation: